Look New Custom Dial Plates for our N50 series Variable Capacitors
Custom Dial Plates for the N50 series Variable Capacitors will help you get the most out of your Variable Capacitors.
0 to 100 scale.
Fits Capacitors with 1/4 inch Diameter Shaft
Use with Knobs up to 1.32" in Diameter.
Featured is a Brass Faced Aluminum plate 2 inches in Diameter that has been laser engraved.
Has Brass Sleeve with Brass Set Screw.
The Dial Plate sits out from the front panel just far enough to allow a small screw driver to access the Set Screw.
Works with panels up to 1/8 inch thick!
When used with our N50P 8 to 1 Variable Capacitors you will get four revolutions of the shaft to move this Dial Plate from 0 to 100.
You can customize your Dial Plate by replacing the Crystal Radio Supply at the bottom of the Dial Plate with up to 20 letters of your own text. (Including spaces). The use of curved text or straight text will be up to Crystal Radio Supply. Normally shorter words like WB5JYE will be in straight text while longer words will be in curved text.
Just select the Custom Dial Plate Option and at check out in the "your notice to us block leave the text that you want entered. (Not responsible for spelling so make you enter what you want) . Allow up to five days for shipping of custom Dial Plates.
Great Deal on a Great Capacitor!
These Capacitors are very popular for Crystal Radio and Ham projects.
Priced Right !
Air Variable Capacitor with built in 8:1 planetary drive.
The 8:1 planetary drive provides four full turns of the shaft from Maximum Capacitance to Minimum Capacitance.
The performance you want at a price you can afford.
Quality Duel-Gang 365pf Variable Capacitor
Hard to beat this Price !
Great Deal on a Heavy Duty two-gang variable capacitor.
Hard to Find Two-Gang Air Variable with built in 6:1 Planetary Drive.
Sorry Out Of Stock!
Your building a project and laying out the bucks for a two gang capacitor.
You already have so much invested !
This is not the place to cut corners for a few dollars more you can have the performance of a quality built in 6:1 planetary drive.
Great for those miniture radio projects because you can use your large diameter 1/4 inch knob.
Has a small envelope only measures about 7/8 inch square and 1/2 inch thick not counting the shaft .
The shaft is about 9/16 inch long.
Two-gang variable, one section is a 80pf and the second section is 160pf. connect them in parallel for 240pf.
Each section also has separate trimmer capacitors.
You won't have a hard time finding mounting screws for this capacitor because I supply them free with every purchase!
