Double-click here to change image
HEATHKIT CR-1 CRYSTAL SET
Mounting Brackets

 

  

!

Rotary Switch Mounting Bracket
Just
MBKT-1
!
potbrkt

This is the Mounting Bracket that we use to mount our 12 Position rotary switch.

Has two #6 holes for mounting to surface. ( Screws not included)

Miniture Toggle Switch Mounting Bracket
Only
MBKT-2
!
potbrkt

These are the mounting brackets that we use to mount our miniture toggles switches.

Has two #6 holes for mounting to surface.  ( Screws not included )

Variable Capacitor Mounting Bracket
Only
MBKT-N50
!
1gangmountingbk
Air variable Capacitor Mounting Bracket

Made just for our single section 381pf variable capacitors the N50 and N50P.

 

Mounts to your surface with two #6 holes. (Screws not included)

Two-Gang Variable Capacitor Mounting Plate.
Just
MBKT-S2
!
mplate_2_g
Mounting Plate for the S2 two-gang air variable capacitor.

This aluminum plate screws to the bottom of the capacitor with three machine screws (included) The part of the plate that sticks out from under the capacitor then screws to the board. (screws not included).

Makes a good solid mount.

Note: Shallow holes must be drilled in the board for the machine screw heads to rest in so that the plate will lay flat against the board.